Saturation Trip

Hva betyr 7 ?

This fault indicates an internal issue such as a defective component or a short-circuit/overload in the brake resistor circuit. If accompanied by Fault 1 (Overcurrent), it suggests a problem with the motor cable or the motor itself, leading to saturation conditions within the drive's output stage.

• The magnetic flux in the motor core has reached saturation levels.
• Over-excitation of the motor causing magnetic saturation.
• Incorrect motor control parameters leading to saturation.

Klikk på steg for å spore fremgangen.

1. 1

   Immediately switch off all power to the drive.

2. 2

   If Fault 7 occurs concurrently with Fault 1 (Overcurrent), inspect the motor cables for damage or short circuits.

3. 3

   If Fault 7 occurs concurrently with Fault 1, inspect the motor for insulation issues or internal damage.