Emergency Stop Command

Hva betyr 63 ?

An emergency stop command has been received either through a digital input or via the fieldbus network. This safety mechanism instantly halts the drive and requires a system reset before further operation is permitted.

• Emergency stop button pressed or circuit activated.
• External emergency stop signal received.
• Internal emergency stop logic triggered by safety conditions.
• Software emergency stop command issued.
• Wiring fault in the emergency stop circuit.

Klikk på steg for å spore fremgangen.

1. 1

   Identify and resolve the condition that triggered the emergency stop command from the digital input or fieldbus.

2. 2

   Perform a drive reset to clear the fault and enable acceptance of a new run command.