SERIAL DATA ERROR(EXT)

Hva betyr SV0385 ?

Communications data could not be received from the separate detector. This indicates a failure in the serial communication link from the external detector to the servo system.

• Loose, damaged, or improperly terminated serial communication cable to the external detector.
• External detector's serial communication interface failure.
• Electromagnetic interference (EMI) affecting serial data transfer.
• Corrupted firmware within the external detector.
• Mismatched serial communication parameters (baud rate, stop bits).

Klikk på steg for å spore fremgangen.

1. 1

   Inspect and firmly reseat the serial cable at both ends.

2. 2

   Measure signal integrity on the external detector's serial data lines.

3. 3

   Test with a known good external detector if possible.

4. 4

   Verify communication protocol settings in servo parameters (e.g., P1-02).

5. 5

   Check the external detector's communication port for physical damage.