SERIAL DATA ERROR(INT)

Hva betyr SV0368 ?

Communications data could not be received from the built-in Pulsecoder. This indicates a failure in the serial communication link from the internal encoder to the servo system.

• Loose or damaged serial communication cable between servo and internal Pulsecoder.
• Internal Pulsecoder's serial communication IC failure.
• Signal interference on serial data lines.
• Corrupted firmware in the internal Pulsecoder.
• Incorrect serial communication settings (baud rate, parity).

Klikk på steg for å spore fremgangen.

1. 1

   Inspect and reseat the serial cable at both servo and internal Pulsecoder ends.

2. 2

   Measure signal levels on the internal Pulsecoder serial data lines.

3. 3

   Test with a replacement internal Pulsecoder if available.

4. 4

   Verify communication protocol settings in servo parameters (e.g., P1-02).

5. 5

   Check for any physical damage to the internal Pulsecoder's communication port.