Serial Separate Detector Machine Velocity Feedback Coefficient Exceeded

Hva betyr 0883 ?

This invalid parameter setting alarm occurs for an axis equipped with a serial type separate detector when the machine velocity feedback coefficient is set to a value exceeding 100. The upper limit for this coefficient on such axes is strictly 100, and exceeding it causes an error.

• The machine velocity feedback coefficient has exceeded the maximum allowed value.
• The serial separate detector is reporting an excessively high velocity feedback.
• Parameter P601.1 (Serial Velocity Feedback Coefficient) is too high.
• An internal overflow occurred when processing the serial detector's velocity data.

Klikk på steg for å spore fremgangen.

1. 1

   Correct the machine velocity feedback coefficient so that its value does not exceed 100 for axes with a serial type separate detector.