Not ready for power on

Was bedeutet E2829 ?

The drive is unable to transition to the 'power on' state. This usually indicates a prerequisite for enabling the power section has not been met.

• Internal diagnostics or self-tests not completed successfully.
• Safety circuits (e.g., Safe Torque Off) are not released.
• Control voltage (24VDC) supply issue.
• Parameter errors preventing power section enablement.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Check for any other active warning or fault messages that might be preventing readiness.

2. 2

   Verify that the 24VDC control power supply is present and stable at the drive's control terminals.

3. 3

   Ensure that all safety circuits are correctly wired, closed, and released, allowing the drive to enable its power section.

4. 4

   Cycle power to the drive controller to attempt a full re-initialization.