Required Option Card Missing

What does 8.0.00.17 mean?

The function or parameter being accessed requires a specific option card to be installed in the inverter, which is currently absent. This hardware dependency prevents the requested operation from being executed. The feature associated with the missing option card cannot be utilized.

• Attempting to enable or configure an encoder feedback function (e.g., P3-01 "Encoder Source") when the encoder interface option card (e.g., XT-ENC-01) is not installed in the inverter's option slot.
• Trying to utilize advanced I/O features (e.g., P4-10 "Extended Digital Input") that are only available on a specialized I/O expansion card (e.g., XT-IO-02) which is not present.
• A fieldbus protocol (e.g., EtherCAT, Profinet) is configured (e.g., P6-01 "Fieldbus Type") without the corresponding communication option card (e.g., XT-PROFINET-01) being physically installed.

Click steps to track your progress.

1. 1

   Identify the specific option card required for the desired function or parameter (e.g., XT-ENC-01 for encoder feedback) by consulting the inverter's hardware manual.

2. 2

   Physically install the identified option card into the correct slot (e.g., slot A or B) on the inverter's main control board, ensuring secure connection.

3. 3

   After installation, power cycle the inverter and verify that the new option card is recognized by checking its status parameter (e.g., P0-80 "Option Card Status").

4. 4

   If the option card is installed but still not recognized, ensure the card is correctly seated and free from mechanical damage or bent pins on its connector.

5. 5

   Verify that the inverter's main firmware is compatible with the installed option card's firmware version to avoid communication issues.