Encoder Error

What does 14 mean?

Immediate switch-off due to an issue with the encoder feedback, such as an incorrectly connected encoder cable or shield, a short circuit or broken wire within the cable, or a defective encoder unit itself. This prevents accurate speed and position feedback.

• Encoder feedback signal is lost, corrupted, or inconsistent.
• Faulty encoder on the motor.
• Encoder cable disconnected or damaged, interrupting communication.

Click steps to track your progress.

1. 1

   Check the encoder cable and shield for correct physical connection.

2. 2

   Inspect the encoder cable for any short circuits between conductors or to ground.

3. 3

   Inspect the encoder cable for any broken wires.

4. 4

   If wiring is correct, replace the encoder if it is confirmed defective.