No error

What does 00 mean?

No fault is currently active within the drive system. The MOVIDRIVE® unit is operating normally without any detected issues. This status indicates a healthy system state, requiring no immediate intervention.

• Normal operation of the MOVIDRIVE® inverter with no active faults detected in the drive system.
• All internal monitoring thresholds for current, voltage, and temperature are within their programmed limits.
• Drive is currently idle or operating within expected parameters (e.g., motor speed, output frequency).
• System is stable and ready to accept new control commands or continue current operations.

Click steps to track your progress.

1. 1

   1. Verify that the desired operating mode (e.g., V/f control, vector control) is selected in parameter P0-01.

2. 2

   2. Confirm external control signals (e.g., start/stop, setpoint) are present at their designated input terminals (e.g., X10:01, X10:02) if external control is used.

3. 3

   3. Monitor actual motor speed (n_act) and current (I_act) on the diagnostic display to confirm expected behavior during operation.

4. 4

   4. Review the event log for any transient warnings that might have occurred but did not lead to a fault trip.

5. 5

   5. Record current operational parameters and system status if performing routine maintenance or a planned shutdown.