Option Communication Error

Hva betyr bUS ?

An error occurred during communication with an installed option card (e.g., network card, encoder card). This indicates a problem with the data exchange between the main drive unit and the option module, which can disrupt control or feedback functions.

• Loose or improper physical connection of the option card to the drive's expansion slot
• Incorrect communication settings configured in drive parameters (e.g., network address, baud rate)
• Faulty option card hardware or an issue with the drive's internal communication interface.

Klikk på steg for å spore fremgangen.

1. 1

   Power down the drive completely and reseat the option card firmly into its slot.

2. 2

   Verify all communication parameters (e.g., network address, baud rate, data format) are correctly configured for the specific option card.

3. 3

   Check the cabling between the option card and any external communication network or device for integrity and proper connection.