Power supply failure, KPP/KSP (axis)

Hva betyr 26119 ?

The supply voltage to the KPP or KSP module for a specific axis has fallen below 300 V. This indicates an insufficient power supply, potentially causing erratic operation or complete shutdown.

• Power lead is damaged or disconnected.
• KPP cabling fault.
• Supply voltage dropped below 300V.

Klikk på steg for å spore fremgangen.

1. 1

   Inspect the power lead for damage and proper connection.

2. 2

   Check KPP cabling for damage and correct connections.

3. 3

   Reinitialize the drive bus: Power Off / Power On.

4. 4

   Check the KPP module.