Invalid Prg Command

Hva betyr RS 10 ?

This serial communication error indicates that the program command transmitted to the CLM01.3-M is invalid. The command is not recognized as part of the valid instruction set documented in Chapter 5, Programming.

• The program command in the serial transmission is unrecognized, misspelled, or does not conform to the correct syntax.
• Attempting to transmit a program command that is not supported by the CLM01.3-M firmware or model.
• Corrupted data during serial transmission leading to an invalid command string.
• Sending device software using an incorrect or outdated command list for the CLM01.3-M.

Klikk på steg for å spore fremgangen.

1. 1

   Verify that the program command being transmitted is listed in Chapter 5 (Programming) and is used correctly.

2. 2

   Cross-reference the command in the serial transmission against the valid commands listed in Chapter 5.

3. 3

   Correct any unrecognized or syntactically incorrect commands in the transmitted string.

4. 4

   Re-transmit the program command after verifying its validity and format.

5. 5

   Ensure the sending device's software is compatible with the CLM01.3-M's programming instruction set.