System Failure

Hva betyr 01 ?

This error code indicates a general system failure within the CLM01.3-M control. It suggests an issue with the fundamental operation of the control unit, which could be electrical or related to missing essential data.

• Incorrect or faulty wiring within the CLM01.3-M cabinet.
• Power supply issues affecting the CLM01.3-M controller.
• Missing or corrupted essential parameters upon startup.
• Internal hardware malfunction of the CLM01.3-M.
• Corrupted firmware after an update or during initial setup.

Klikk på steg for å spore fremgangen.

1. 1

   Inspect all wiring connections inside the CLM01.3-M cabinet for looseness, damage, or incorrect terminations according to installation instructions.

2. 2

   Verify all power supplies to the CLM01.3-M are within specifications, including 24VDC control power.

3. 3

   Ensure all necessary parameters have been entered and stored, especially after initial startup or battery replacement.

4. 4

   Perform a controlled power cycle of the CLM01.3-M to clear any transient system states.

5. 5

   If the error persists, contact Indramat Service Department for further diagnosis, as it may indicate an internal hardware failure.