AMA internal fault (Persistent)

Hva betyr 57 ?

An internal fault occurred during the Automatic Motor Adaptation (AMA) process. While a single occurrence might be transient, repeated occurrences suggest a more persistent issue within the drive's control logic or its interaction with the motor, potentially heating the motor due to repeated attempts.

• A transient internal drive software or hardware anomaly occurred during AMA.
• Minor power disturbance to the drive's control board affecting internal processing.
• Temporary corruption of internal drive memory or program execution.
• Excessive electromagnetic interference (EMI) affecting sensitive internal circuits.
• Aging or marginally faulty internal component (e.g., current sensor, processor).

Klikk på steg for å spore fremgangen.

1. 1

   1. Cycle power to the drive (power off for 30 seconds, then power on) and retry the AMA.

2. 2

   2. Perform a factory reset of the drive (e.g., P14-20 = 2) and carefully re-enter all motor and application parameters.

3. 3

   3. Verify incoming AC line voltage stability (L1, L2, L3) using a voltmeter and check for transient sags or surges.

4. 4

   4. Check for proper grounding of the drive and motor, ensuring ground wire resistance is below 1 Ohm.

5. 5

   5. If possible, attempt AMA with a different known-good motor (if available) to rule out motor-specific interactions.