UPS Configuration Error

Hva betyr 0x8001 ?

The function block output `nErrId` shows 0x8001, indicating an error in the Uninterruptible Power Supply (UPS) configuration. This typically means the UPS is not correctly configured in the system or no UPS is detected.

• Error in the configuration of the UPS (Uninterruptible Power Supply).
• Incorrect UPS parameters set.
• UPS not properly recognized by the system.
• Mismatched UPS firmware and configuration.

Klikk på steg for å spore fremgangen.

1. 1

   Verify the UPS configuration settings via the Windows UPS service (Control Panel > Energy Options > UPS) or the Beckhoff Shell extension (Control Panel > Energy Options > Beckhoff UPS Configuration).

2. 2

   Ensure a compatible UPS device is physically connected to the Embedded PC and is properly recognized by the operating system.

3. 3

   Confirm that the Beckhoff UPS software components are installed and active on the operating system.