I/O Fault

¿Qué significa 704 ?

This status code indicates a fault with an external Input/Output (I/O) connected to the Fronius Primo GEN24 208-240 inverter, such as a relay or digital input. This can be caused by wiring issues, a faulty external device connected to the I/O, or an internal I/O circuit fault within the inverter.

• Wiring issue to the relevant I/O terminals (e.g., loose connection, break, or short circuit).
• The external device connected to the I/O (e.g., contactor for relay output, sensor for digital input) is faulty.
• Incorrect I/O configuration settings in the inverter's parameters.
• An internal I/O circuit fault within the inverter.

Haga clic en los pasos para seguir su progreso.

1. 1

   Check the wiring to the relevant I/O terminals (e.g., relay contacts, digital inputs) for proper connection and continuity.

2. 2

   Test the external device connected to the I/O for functionality and ensure it is operating correctly.

3. 3

   Verify the I/O configuration settings in the inverter's user interface to ensure they match the connected device and desired operation.

4. 4

   De-energize the inverter (switch off AC and DC disconnects), wait for 5 minutes, then re-energize to reset. If the message persists, the inverter may require service.