Internal Link Fault 1

What does ILF1 mean?

Indicates a communication interruption between option card 1 and the drive. This fault code is read-only and persists until the drive is disconnected and reconnected to power. It implies that the functionality of option card 1 is unavailable, potentially impacting external communications or I/O.

• A specific internal communication path (Link 1) has failed.
• Defective internal wiring or termination at the connector.
• Interference on the internal communication bus.
• Failure of a connected slave device on Link 1.

Click steps to track your progress.

1. 1

   Ensure option card 1 is properly seated and secured in its slot.

2. 2

   Inspect the connectors on both the option card and the drive for any physical damage.

3. 3

   Power cycle the drive to attempt a reset and re-establish internal communication.

4. 4

   If possible, try swapping option card 1 with a known good card to isolate the issue.