No process gas!

What does MissingProcess- Gas mean?

The required process gas supply is either off, depleted, or not reaching the laser system at the required pressure. This prevents proper laser operation and affects process quality.

• Process gas supply is interrupted or absent.
• Low pressure detected in the process gas line.
• Gas flow sensor failure or blockage.
• Incorrect gas mixture detected.
• Gas cylinder depleted or valve closed.

Click steps to track your progress.

1. 1

   Verify the process gas supply tank level and ensure all gas valves are open.

2. 2

   Check the gas pressure at the laser system's input manifold.

3. 3

   Acknowledge the message on the robot controller HMI.

4. 4

   Resume or restart the program.