CheckMedia- Control
Check media control!
Kuka · LaserTech 3.1
What does CheckMedia- Control mean?
An error related to media control (e.g., process gas, cooling water, compressed air) has occurred. This issue needs to be resolved before the process can continue.
Common Causes
- Missing or incorrect media supply to control system.
- Control system failure due to improper media.
- Incorrect media type detected by control.
- Insufficient media flow rate.
- Media contamination affecting control operation.
Repair Steps & Checklist
Click steps to track your progress.
- 1
Identify and resolve the specific media error (e.g., verify gas pressure, check water flow, inspect media lines).
- 2
Acknowledge the message on the robot controller HMI.
- 3
Resume or restart the active program.
Verified technical data. Last updated: March 2026
Related Faults
AcknWfdHeat- MessagePlease acknowledge errors on the wire heater unitCollectionErro- rOfLaserError of laser system ---> Resumption of process possible after dialog and forced reset of laserCompleteCold- RunComplete program will be continued without active process. Resumption with active process by executing LASER_INIT command
Source: Kuka LaserTech 3.1