Configuration Error

Was bedeutet ALARM (Config Error) ?

The phone board detects a problem with its configuration, manifesting as either a missing configuration or an incorrect one. This is indicated by a specific fast blinking pattern (0.3 s ON, 0.3 s OFF, 0.3 s ON, 2 s OFF). A configuration error can prevent the system from operating correctly, impacting communication and alarm processing capabilities.

• The configuration data has not been successfully downloaded or stored on the phone board.
• The existing configuration data on the phone board is corrupted or incomplete.
• Incorrect parameters or settings have been loaded onto the phone board during a previous configuration attempt.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Perform a new configuration download to the phone board; utilize the DTMF configuration mode to ensure proper transfer.

2. 2

   Compare the downloaded configuration parameters with the official system specifications for the KONE Remote Monitoring system (KRMS).

3. 3

   If persistent, inspect the phone board for any physical damage or signs of component failure that could affect configuration storage.