- OVERTRAVEL ( SOFT 1 )

Was bedeutet IE0002 ?

This Fanuc Series 0i-D/0i Mate-D malfunction prevention alarm indicates that the stored stroke check 1 on the negative side for an axis has been exceeded. This is a software limit violation.

• NC program error commanding movement beyond the negative software limit 1.
• Incorrect setting of the software limit parameter for negative stroke check 1.
• Manual operation or jog movement exceeding the defined negative software limit 1.
• Tool length offsets or work offsets are incorrectly applied, causing an apparent overtravel.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Check the NC program for coordinate values or movements that exceed the defined negative software limit 1 for the affected axis.

2. 2

   Verify the parameter setting for the negative software limit 1 for the specific axis, ensuring it is correctly configured.

3. 3

   Ensure that tool length offsets or work offsets are accurately entered and do not cause an overtravel condition.

4. 4

   In manual mode, jog the affected axis in the positive direction away from the limit, then reset the alarm.

5. 5

   Confirm that the machine's reference position (zero return) has been correctly established for the affected axis.