Feedrate override S-0-0108 = 0

What does E2055 mean?

The feedrate override parameter S-0-0108 is set to zero, effectively stopping all motion. This prevents any velocity or position commands from being executed.

• Feedrate override parameter S-0-0108 was intentionally or accidentally set to 0.
• External PLC or HMI command setting the feedrate override to 0.
• System logic error preventing the override value from being set above 0.

Click steps to track your progress.

1. 1

   Verify the value of parameter S-0-0108 (Feedrate override) in the drive controller and ensure it is set to a non-zero value.

2. 2

   Check the machine's HMI or control program for any active feedrate override settings that might be forced to 0.

3. 3

   Trace the logic controlling S-0-0108 to ensure no unexpected conditions are setting it to zero.

4. 4

   If controlled externally, check the master communication for valid override values.