PLC Detection Error 1
Yaskawa · P1000
Hva betyr PE1 ?
The drive has detected an error related to its internal PLC functionality or communication, specifically PLC Detection Error 1. This affects programmed logic execution.
Reparasjonssteg & Sjekkliste
Klikk på steg for å spore fremgangen.
- 1
Verify drive parameters related to internal PLC operation and execution (e.g., control mode, PLC enable/disable, program selection parameters) against the original system configuration.
- 2
Connect to the Yaskawa P1000 drive using DriveWorks NXT or equivalent software, verify the integrity and correct version of the loaded internal PLC program, and re-download if any discrepancies or corruption are detected.
- 3
Monitor the drive's diagnostic registers and fault history via the HMI or software for any accompanying errors, warnings, or specific PLC runtime status indicators.
- 4
Perform a controlled power cycle of the Yaskawa P1000 AC drive, ensuring all power is removed and reapplied correctly, to clear any transient software or communication issues.