Drive Timed Overload (Adv. Code 0)

Hva betyr 28 ?

This fault occurs when the drive detects an overload condition that surpasses its specified rating for a sustained period. For normal duty, the drive is rated for 120% of nameplate current for 60 seconds, and for heavy duty, 150% for 60 seconds. Sustained overload can damage the drive's internal power components.

• Motor load torque consistently exceeding the drive's continuous current rating (e.g., operating above parameter P1-03 Motor Rated Current).
• Improper acceleration/deceleration ramp times (P1-10, P1-11) causing excessive current draw during speed changes.
• Motor shaft or driven equipment binding, increasing required torque and current beyond the motor nameplate rating.
• Poor drive heatsink cooling due to blocked fins or failed cooling fan, leading to reduced current capability.

Klikk på steg for å spore fremgangen.

1. 1

   1. Monitor output current (Parameter P0-01) during operation and compare it to the drive's nameplate continuous current rating.

2. 2

   2. Increase acceleration time (P1-10) and deceleration time (P1-11) by 15-20% to reduce current transients during speed changes.

3. 3

   3. Mechanically inspect the motor and driven load for excessive friction, bearing issues, or blockages, confirming free rotation.

4. 4

   4. Verify drive cooling fan operation and ensure heatsink fins are free from dust and debris; measure ambient temperature around the drive (should be within 0-50°C).

5. 5

   5. Confirm motor parameters (P1-01 through P1-07) are accurately programmed into the drive, matching motor nameplate data.