Power unit: Rectifier overtemperature

Hva betyr A05004 ?

The rectifier in the power unit has reached its overtemperature alarm threshold. If the temperature rises by an additional 5 K, it will trigger fault F30037, potentially causing a drive shutdown. Causes can include high ambient temperature, excessive load, fan failure, or issues with the line supply. Ignoring this can lead to rectifier damage.

• Excessive or unbalanced input line current (r0027, r0068) due to harmonic distortion or an overloaded motor.
• High ambient temperature within the control cabinet, hindering efficient heat dissipation from the rectifier section.
• Degradation of the rectifier stack or individual rectifier diodes within the power unit.
• Poor cooling efficiency around the rectifier heat sink due to dust buildup or restricted airflow.
• Unstable or high AC input supply voltage (r0025) exceeding the drive's design limits, increasing rectifier losses.

Klikk på steg for å spore fremgangen.

1. 1

   Measure the AC input supply voltage (L1, L2, L3) and current (r0068) on all three phases with a true RMS meter; ensure they are balanced.

2. 2

   Inspect and clean the rectifier heat sink area within the power unit, removing any dust or obstructions.

3. 3

   Verify the control cabinet's internal temperature and ensure adequate ventilation around the drive's input section.

4. 4

   Reduce the drive's output load (r0027) temporarily to observe if the rectifier temperature (e.g., r0037) decreases.

5. 5

   Check the DC link voltage (r0026) for stability and compare to expected levels based on the input voltage (P0210).