Start condition/output open

Hva betyr 81 ?

This fault indicates an issue with the start condition, specifically relevant in hoist operation mode, or an open circuit in the output. It could be due to a phase failure in the motor lead preventing proper startup or operation.

• Start command sent but output contact failed to close.
• Feedback signal from output contact is missing or incorrect.
• Wiring issue preventing output contact closure.
• Mechanical obstruction of the output contact.

Klikk på steg for å spore fremgangen.

1. 1

   Check the motor lead for phase failure.

2. 2

   Reset the fault by switching off the DC 24 V supply voltage.