Fieldbus Timeout

Hva betyr FF0205h ?

This fault signals an interruption in the fieldbus communication between the MOVI-PLC® and the master controller. When this timeout occurs, all internal setpoints are cleared to ensure a safe state for the axis system. This diagnostic function cyclically monitors bus communication.

• Loss of communication with the fieldbus master controller.
• Interruption in data exchange between MOVI-PLC® and master.
• Fieldbus network cable disconnected or faulty.

Klikk på steg for å spore fremgangen.

1. 1

   Verify the fieldbus cable connection between the MOVI-PLC® and the master controller is secure.

2. 2

   Check the status LEDs on the fieldbus interface for communication activity.

3. 3

   Inspect the fieldbus cable for any signs of physical damage or kinked wires.

4. 4

   Confirm the fieldbus master controller is powered and operational.