24 V supply error

Hva betyr 15 ?

The 24 VDC supply voltage, which powers the MOVIMOT drive's control electronics, is faulty or missing. This is a critical voltage for the internal logic and communication.

• Missing 24 VDC supply voltage
• Unstable or out-of-tolerance 24 VDC supply voltage
• Faulty external 24 VDC power supply

Klikk på steg for å spore fremgangen.

1. 1

   Measure the 24 VDC supply voltage at the MOVIMOT drive's input terminals (e.g., X10 terminals 1 and 2) and compare against the nominal value.

2. 2

   Verify the operational status and output voltage of the external 24 VDC power supply unit (PSU).

3. 3

   Inspect the 24 VDC supply cabling from the PSU to the MOVIMOT drive for loose connections, damage, or insulation faults.

4. 4

   Check for any external loads or devices connected to the 24 VDC circuit that might be causing an overload or short circuit condition.