Target Velocity Setting Out of Range

Hva betyr 5422 hex ?

This error occurs when a motion instruction is executed without setting a valid target velocity, or if the set value is outside the acceptable non-negative range. The system requires a properly defined target velocity to initiate controlled motion.

• The target velocity parameter was not explicitly set before executing the motion instruction.
• An invalid value, such as a negative number or a value exceeding the controller's limits, was provided for the target velocity parameter.

Klikk på steg for å spore fremgangen.

1. 1

   Verify that the target velocity parameter is set to a non-negative numerical value before executing the instruction.

2. 2

   Check the instruction's input variables to confirm the target velocity is correctly assigned and within operational limits.