Brake transistor err

Hva betyr E.BE ?

The inverter output is shut off due to a fault in the brake circuit, typically indicating damage to the brake transistor. This is a critical internal hardware fault requiring immediate attention to prevent further damage.

• Brake transistor failure.
• The electronic brake is not functioning correctly.
• Overheating of the brake transistor.
• Internal fault in the brake control circuit.
• Short circuit within the brake system.

Klikk på steg for å spore fremgangen.

1. 1

   Reduce the load inertia to minimize demands on the regenerative braking circuit.

2. 2

   Check that the brake duty cycle is proper for the application, ensuring it does not exceed the inverter's capabilities.

3. 3

   Replace the entire inverter as this fault often signifies irreparable internal damage.