Initial Status (No Baton Addressed to Host)

Hva betyr F11F ?

The system is in an initial status where no baton is being addressed to the host station. This can be caused by parameter/switch settings or a mix of incompatible network modules.

• Parameter error or incorrect switch settings for the corresponding remote master station
• Mixing MESLECNET/H remote I/O network modules with MELSECNET/10 network modules

Klikk på steg for å spore fremgangen.

1. 1

   Review all parameter and switch settings for the affected station, ensuring they are correct and the station is properly configured as a remote master station

2. 2

   Confirm that only one type of network module (e.g., MESLECNET/H or MELSECNET/10) is used within the network and matches the control station type