Maintenance Signal Output

Hva betyr Maintenance signal output ?

The cumulative energization time has exceeded the value set in the maintenance output timer (Pr. 503 Maintenance timer). This is a warning indicating that routine scheduled maintenance is due based on operating hours. While not a fault that stops operation, ignoring it can lead to component degradation and potential future failures.

• The cumulative run time (or energization time) of the inverter has exceeded the threshold set in Pr. 503 (Maintenance timer).
• The maintenance timer was set to a low value (e.g., for initial break-in period) and has now been reached.
• Routine maintenance has been overlooked or postponed, leading to the timer expiring.
• The inverter has been powered ON for a long duration without the timer being reset after maintenance.

Klikk på steg for å spore fremgangen.

1. 1

   Record the current cumulative run time (e.g., using Pr. 502 Cumulative operation time) to track usage.

2. 2

   Perform scheduled maintenance activities on the inverter and motor, such as cleaning cooling fins, checking terminal connections, and inspecting fan operation.

3. 3

   After completing maintenance, reset the maintenance timer by writing '0' to Pr. 503 (Maintenance timer) to clear the warning.

4. 4

   Adjust Pr. 503 (Maintenance timer) to a new interval (e.g., 8760 hours for annual maintenance) according to the preventive maintenance schedule.

5. 5

   Log the maintenance date and time in the equipment's service history.