FMF Error

Hva betyr 65311 ?

This fault indicates a general configuration or runtime error within the FMF (Function Module Framework) system. Further diagnostics are required to pinpoint the exact cause of the issue within the module's operation.

• Corruption of the Function Module Framework's internal configuration parameters or loaded module data.
• Incompatible or incorrectly configured function modules (e.g., safety modules, specific application macros) loaded into the drive.
• Firmware version incompatibility with installed function modules, especially after an update or downgrade.
• Internal memory fault within the drive affecting the FMF's ability to store or execute modules.
• Resource limitations (e.g., CPU, memory) if too many complex function modules are activated simultaneously.

Klikk på steg for å spore fremgangen.

1. 1

   Access the FMF configuration menu and review currently active or loaded function modules for inconsistencies or errors.

2. 2

   Attempt to disable non-essential function modules one by one to isolate the problematic component.

3. 3

   Re-initialize (e.g., P99.00 = 1) or reload the default FMF configuration, then re-enable required modules.

4. 4

   Update the inverter's firmware to the latest version to ensure compatibility with all function modules.

5. 5

   If possible, connect a diagnostic tool to the drive to retrieve specific FMF error codes or logs for detailed analysis.