No multiplex feature for DSE-channel

Hva betyr 344 ?

Force mode is activated, but the RDC (Robot Drive Controller) does not have the required plug-on card for multiplex operation. Consequently, force mode will not be activated.

• Attempted to use a multiplex feature on a DSE-channel which does not support it.
• The specific DSE-channel hardware or software configuration does not allow for multiplexing.
• Feature not enabled or available for the current channel setup.

Klikk på steg for å spore fremgangen.

1. 1

   Connect the appropriate RDC plug-on card for multiplex operation.

2. 2

   Explicitly deactivate force mode if multiplex operation is not required.