Hardware fault, KPP/KSP (axis)

Hva betyr 26117 ?

The KPP or KSP device for a specific axis has detected an internal hardware fault. This indicates a physical component failure within the unit itself, such as a faulty power supply component, damaged control board, or other internal defect. This fault typically renders the device inoperable.

Klikk på steg for å spore fremgangen.

1. 1

   Perform a Power Off / Power On cycle of the entire system to reinitialize the drive bus.

2. 2

   Observe the LEDs on the device to interpret any specific fault patterns or indications.

3. 3

   Replace the KPP or KSP device with a known good unit.