Oversetter...
invalid Gateway-ID

Invalid Gateway-ID

Kuka · KR C4 DeviceNet

Hva betyr invalid Gateway-ID ?

The gateway module's identifier (ID) is unknown or not recognized by the system. This leads to a configuration error (Message 4429) as the system cannot properly identify or initialize the gateway.

Vanlige årsaker

  • An invalid Gateway-ID was detected or assigned.
  • Duplicate Gateway-IDs on the network.
  • Gateway-ID out of the valid range.
  • Configuration error for the Gateway-ID (P1-050).

Reparasjonssteg & Sjekkliste

Klikk på steg for å spore fremgangen.

  1. 1

    Use a different gateway module that is recognized by the system.

  2. 2

    Reconfigure the bus after replacing the module.

Se alle koder i denne manualen (12)
Verifisert teknisk data. Sist oppdatert: March 2026

Relaterte feilkoder

Error opening 'ecatms_sys_X44_swap.xml' FileError opening 'ecatms_sys_X44_swap.xml'IODataCreate() ErrorIODataCreate() ErrorInvalid ECatWrapper interfaceInvalid ECatWrapper interface
Kilde: Kuka KR C4 DeviceNet
Open Manual (Page 32)Søk flere koder i denne manualen