Overlapping of switches 61:U and N too small

Hva betyr 0112 ?

The shaft setup for the V3F25/18 drive is not completed. This indicates an issue with the physical positioning or alignment of the vanes or magnets and their corresponding switches, leading to insufficient overlap between switches 61:U and N.

• Vanes or magnets and switches are not positioned according to the shaft vane diagram.
• Vanes are not correctly aligned in accordance to the oscillator reader.

Klikk på steg for å spore fremgangen.

1. 1

   Check that the vanes or magnets and switches are positioned according to the shaft vane diagram.

2. 2

   If vanes are present, ensure they are correctly aligned in accordance with the oscillator reader.

3. 3

   Perform the shaft setup again after vane or magnet/switch adjustment.