Over-torque

Hva betyr 6 ?

This error indicates that the motor torque has exceeded a predefined maximum limit set in the drive. This typically occurs when the mechanical load on the motor is too high, or acceleration/deceleration ramps are configured too aggressively, demanding excessive torque.

• Mechanical overload on the motor, exceeding its rated capacity.
• Incorrectly set torque limits or overload thresholds in the drive's parameters.
• Physical obstruction or binding within the mechanical system preventing free movement.
• Acceleration or deceleration ramps set too aggressively for the connected load.

Klikk på steg for å spore fremgangen.

1. 1

   Reduce the mechanical load on the motor to ensure it operates within its rated torque capacity.

2. 2

   Review and adjust the drive's torque limit parameters (e.g., maximum output torque, overload threshold) to appropriate values for the application.

3. 3

   Inspect the mechanical system for any signs of binding, excessive friction, or physical obstructions.

4. 4

   Increase the acceleration or deceleration ramp times in the drive parameters to reduce peak torque demands during transitions.