Safety rel. position limit val., exc. in pos. dir.

Hva betyr F7011 ?

The motor's actual position has exceeded a defined safety-related position limit in the positive direction. This fault is triggered by safety monitoring functions (e.g., Safely Limited Position) to prevent the axis from moving beyond a safe physical boundary.

• Uncontrolled or unintended movement beyond the positive safety limit.
• Incorrectly configured safety-related positive position limit parameter.
• Faulty position feedback (encoder) providing erroneous actual position values.
• Mechanical overrun due to excessive inertia or braking distance.

Klikk på steg for å spore fremgangen.

1. 1

   Verify the configured safety-related positive position limit parameter (e.g., S-0-0XXX Safe Positive Position Limit) in the IndraDrive.

2. 2

   Check for any mechanical issues that could cause the axis to overshoot its intended position, such as worn brakes or excessive play.

3. 3

   Inspect the position encoder and its cabling for proper function and signal integrity.

4. 4

   Review the motion control program for unintended commands or logic errors that might cause overtravel.

5. 5

   Adjust deceleration ramps or braking parameters if the axis consistently overshoots due to inertia.