Positioning velocity >= limit value

Hva betyr E2049 ?

The actual positioning velocity of the motor in the IndraDrive MPx02 has reached or exceeded the configured velocity limit. This is a warning indicating that the motor is operating at its maximum allowed speed, potentially due to an aggressive command, incorrect scaling, or an unexpected external condition.

• Commanded velocity from the master controller is too high, exceeding the configured limit.
• Incorrect velocity scaling parameters in the drive or master controller.
• Mechanical system feedback issue causing an overspeed indication from the encoder.
• A motion profile is requesting velocity beyond the design limits of the motor or machine.
• Unexpected external forces aiding motion, leading to exceeding velocity limits.

Klikk på steg for å spore fremgangen.

1. 1

   Verify the commanded velocity from the master control system and compare it against the drive's configured velocity limits (e.g., P-0-0090, Velocity command value limit).

2. 2

   Adjust the commanded velocity or the motion profile to ensure it stays within the mechanical and electrical limits of the system and the drive.

3. 3

   Review any velocity scaling parameters in the IndraDrive MPx02 or the master controller to ensure correct unit conversion and limits.

4. 4

   Monitor the actual velocity feedback to confirm its accuracy and rule out encoder issues if the motor does not appear to be moving excessively fast.

5. 5

   If a higher velocity is required, ensure the mechanical system can safely handle it, then increase the drive's velocity limit parameters.