Motor overtemp. shutdown
Indramat · DIAX 04
Hva betyr F219 ?
The DIAX04 SSE-03VRS drive has received a signal indicating that the connected motor's temperature has exceeded a safe limit, causing an immediate shutdown. This protects the motor windings from irreversible damage due to overheating. This fault typically relies on a motor-mounted temperature sensor (e.g., PTC, KTY, PT100) connected to the drive.
Vanlige årsaker
- Motor is overloaded, drawing excessive current for an extended period.
- Motor cooling fan is blocked, dirty, or faulty.
- Ambient temperature around the motor is too high.
- Motor temperature sensor or its wiring is defective or disconnected.
- Drive parameters for motor thermal model (e.g., S-0-0097) are incorrect or not configured.
Reparasjonssteg & Sjekkliste
Klikk på steg for å spore fremgangen.
- 1
Allow the motor to cool down. Do not attempt to reset the DIAX04 SSE-03VRS drive until the motor temperature has normalized.
- 2
Check the mechanical load on the motor for any binding, obstructions, or excessive friction.
- 3
Verify the motor cooling system (fan, fins) is clean and operational.
- 4
Inspect the motor temperature sensor wiring back to the DIAX04 SSE-03VRS for damage, shorts, or open circuits. Test the sensor if possible.
- 5
Review and verify motor thermal model parameters (e.g., S-0-0097) in the DIAX04 SSE-03VRS drive to ensure they match the motor's characteristics.