Invalid Machining Area

Hva betyr 3006 ?

This P/S alarm indicates that the machining area specified in the program is invalid. This issue typically arises from incorrect definitions of the part figure or blank figure within the machining profile, leading to an ambiguous or impossible machining boundary.

• The programmed cutting area is geometrically impossible or invalid.
• Interference between tool and machine components within the defined area.
• Tool path moves outside the machine's allowed work envelope.
• Parameter mismatch for defining machining boundaries (e.g., P1-10).

Klikk på steg for å spore fremgangen.

1. 1

   Modify the machining program to specify a correct machining area, ensuring valid part figure and blank figure definitions within the machining profile.