Battery Zero Alarm

Hva betyr Battery zero alarm ?

This alarm indicates that the absolute position data for the Pulsecoder may be lost or displaced, often occurring if the sensor head is moved after the initial power-on and conduction state, or if the battery is depleted/disconnected.

• Battery voltage has dropped to zero or critically low levels.
• Complete loss of battery power due to internal failure or disconnection.
• Faulty battery management system reporting incorrect voltage.
• Charger failure leading to complete battery discharge.
• Incorrect battery type or capacity selected in system configuration.

Klikk på steg for å spore fremgangen.

1. 1

   Detach cable K1 from connector OUT1 of the sensor circuit.

2. 2

   Connect connector IN2 to connector OUT1 on the sensor circuit.

3. 3

   Maintain this connection for 10 seconds.

4. 4

   Connect all other sensor cables correctly.

5. 5

   Reconnect cable K1 to OUT1.

6. 6

   Perform reference position return operation after ensuring the alarm is issued.