Temperature Sensor Disconnected

Hva betyr SP0006 ?

The temperature sensor connected to the spindle amplifier is disconnected. This prevents accurate monitoring of motor temperature, leading to a potential overheat risk.

• Temperature sensor (thermistor or RTD) disconnected from the amplifier.
• Break in the sensor's wiring harness.
• Faulty temperature sensor itself.
• Incorrect sensor type configured in amplifier parameters.
• Connector pin failure for the temperature sensor input.

Klikk på steg for å spore fremgangen.

1. 1

   Measure the resistance of the temperature sensor element at ambient temperature.

2. 2

   Inspect the temperature sensor cable for breaks or damage.

3. 3

   Verify the sensor type (e.g., NTC, PTC, PT100) matches parameter P1-07.

4. 4

   Ensure the temperature sensor connector is securely plugged into the amplifier.

5. 5

   Apply gentle heat to the sensor and monitor resistance change.