Hardware variant not supported

Hva betyr F2892 ?

The detected hardware variant of the drive or an installed module is not supported by the current firmware. This typically occurs when a new or different hardware version is used with an older or incompatible firmware release. The drive will not be able to operate safely or correctly without compatible firmware.

• Firmware version is too old for the installed hardware
• Hardware is not officially supported by the drive system
• Incorrect hardware module installed (e.g., wrong revision)
• Mismatch between control and power section hardware versions
• Corrupted firmware preventing proper hardware recognition

Klikk på steg for å spore fremgangen.

1. 1

   Verify the exact part numbers and revision levels of the IndraDrive MPx02 and all installed option modules by physically inspecting their labels.

2. 2

   Check the currently installed firmware version of the IndraDrive MPx02 via the drive's display or using Bosch Rexroth IndraWorks diagnostic software.

3. 3

   Consult Bosch Rexroth documentation (e.g., firmware release notes, compatibility lists) to determine the compatible firmware version for the detected hardware variant(s).

4. 4

   Review the system's maintenance logs or installation records to identify any recent hardware replacements or upgrades of the drive or its modules.