Environment Error: Internal temperature below minimum

Hva betyr 6 ?

When LED Diag 1 is off and LED Diag 2 flashes with code 6 (400ms ON / 400ms OFF), it indicates that the TwinSAFE component's internal temperature has fallen below its minimum safe operating limit. This environment error suggests operation in an excessively cold environment, which might affect component performance, material properties, or lead to condensation issues if cold-soaked.

• Operating environment temperature is below the minimum specified range.
• Device is located in an unheated or excessively cold area.
• Cold ambient conditions affecting component performance.
• Incorrect thermostat settings for climate-controlled enclosure.

Klikk på steg for å spore fremgangen.

1. 1

   Measure ambient temperature at the device location using a calibrated thermometer.

2. 2

   Confirm that the operating environment meets the minimum temperature requirements specified in the datasheet.

3. 3

   Ensure enclosure heating (if applicable) is functioning correctly.

4. 4

   Verify the device is not exposed to direct drafts of cold air.