Analog In Loss

Hva betyr 29 ?

An analog input is configured to fault on signal loss, and a signal loss has occurred. This condition can be configured and monitored using parameters like [Anlg In 1, 2 Loss] on page 1-55. The root cause is typically a missing or interrupted input signal.

• Loss of signal on a configured analog input.
• Incorrect wiring of the analog sensor or transmitter.
• Analog input range misconfiguration (P0-41, P0-42).
• Faulty analog input circuitry within the drive.

Klikk på steg for å spore fremgangen.

1. 1

   Check parameter [Anlg In 1, 2 Loss] on page 1-55 to verify the analog input loss configuration.

2. 2

   Verify physical connections at the analog input terminals for breaks or looseness.