Module Not Powered or Connection Absent

Hva betyr Off ?

The module (applies to both analog input and output modules) is not powered, or a connection from the controller to the module has not been established, or the specific channel is disabled. This prevents the module from operating as intended and requires investigation into power, communication, or configuration settings.

• Module is not receiving 24VDC system power.
• No EtherNet/IP connection established from the owner-controller to the module.
• The specific input or output channel is disabled in the Logix Designer application configuration.

Klikk på steg for å spore fremgangen.

1. 1

   Confirm that the overall system is powered on.

2. 2

   Verify the module is physically installed correctly in its backplane slot.

3. 3

   In the Logix Designer application, confirm the channel is not disabled and has an active connection to the controller.