Can't set flux control integral gain

Hva betyr 4071 ?

The drive is unable to set the integral gain for the flux control loop. This error typically indicates issues with motor data that prevent proper calculation and application of flux control parameters, although the manual states it may not appear as an API error.

• Incorrect motor data entered in the drive parameters.
• Motor model or type incompatible with the selected flux control strategy.
• Internal drive calculation error due to inconsistent or invalid motor parameters.
• Parameter limits or ranges being exceeded during the gain calculation.

Klikk på steg for å spore fremgangen.

1. 1

   Check all motor data parameters (e.g., rated voltage, current, frequency, power, pole pairs) for accuracy against the motor nameplate.

2. 2

   Verify that the selected motor type and control method are appropriate for the connected motor.

3. 3

   Re-run the motor identification or autotuning process after correcting motor data.

4. 4

   If available, check the flux control loop parameters and ensure their range and scaling are valid.