FPGA failed to initialize

Hva betyr 30005 ?

The controller's FPGA (Field-Programmable Gate Array) has failed to initialize properly during power-up or operation.

• A temporary software or hardware glitch during the FPGA initialization sequence.
• Corrupted firmware affecting the FPGA loading process.
• An internal hardware failure within the drive's controller board related to the FPGA component.

Klikk på steg for å spore fremgangen.

1. 1

   Perform a complete power cycle of the drive (turn off power, wait for capacitors to discharge, then reapply power).

2. 2

   If the error persists after power cycling, contact ABB technical support for further diagnosis and potential hardware evaluation.

3. 3

   Prepare for possible drive replacement if the error remains unresolved, as it often indicates an internal hardware fault.